2-Pack 2.5" Lift Low Profile Car Ramps 22000 Lbs GVW, Black

Make routine service easier for low-chassis vehicles with these low-profile car repair ramps. A 2.5" lift, 8° incline, 22,000 lbs GVW capacity, heavy-duty PP composite body, non-slip texture, and portable design suit DIY and pro garage use.

Overview:

• Low-profile car repair ramps designed to make routine service easier for low-chassis vehicles, sports cars, tuned sedans, and modified cars.
• Ideal for DIY repairs, professional shop use, oil changes, car cleaning, and under-carriage repairs.
• Unique jack-assist design pre-lifts your vehicle for effortless jacking; not for direct under-car crawling without a jack.
• Use only on hard, level surfaces such as asphalt, cement, or indoor parking lots; not for dirt, grass, or inclined ground.
• Compact and portable for quick transport and storage in trunks, service vans, or shop cabinets.

Highlights:

• Pre-lifts your vehicle for effortless jacking, not for direct crawling.
• 2.5" low lift height suits low-chassis vehicles and modified cars.
• 8° incline angle minimizes the risk of undercarriage scraping.
• Supports up to 22,000 lbs / 10 ton GVW per pair for heavier models.
• Reliable construction with heavy-duty PP composite body.
• Hollowed honeycomb structure promotes structural strength.
• Non-slip, textured surface and wheel stop for secure tire placement.
• Efficient drainage with the open-bottom design.
• Stays stable on asphalt road, cement road, or indoor parking lot.
• Lightweight with integrated handle for quick transport and storage.
• Wide applicable scenarios for DIY repairs and professional shop use.
• Ideal for tasks like oil changes, car cleaning, or under-carriage repairs.
• Compact size fits neatly in trunks and cabinets.
• Use only on hard, level surfaces, not for dirt, grass, or inclined ground.

Features:

• Jack-Assist Only: This 2 pcs car ramp set is engineered to raise your vehicle by 2.5", creating the extra space needed to position a floor jack. Please note that they are not meant for direct under-car crawling without a jack.
• Low-Entry Angle: Designed with a gentle 8° incline, these low-profile ramps are ideal for sports cars, tuned sedans, and modified vehicles with limited space off ground, helping to reduce the risk of bumper or side-skirt contact during lifting.
• 22,000 Lbs GVW Capacity: Supporting vehicles up to 22,000 lbs GVW, each ramp loads up to 6,500 lbs (13,000 lbs per pair). The heavy-duty PP composite body gives them dependable strength for most models and maintenance tasks.
• Traction & Stop Control: The anti-slip texture and integrated wheel stops help keep tires firmly in place once mounted. The open honeycomb substructure enhances structural rigidity while allowing rainwater, debris and oil to drain through, keeping your workspace cleaner.
• Lightweight & Portable Design: At only 6.9 lbs/3.1 kg per pair with a recessed carry handle, these car service ramps are easy to carry and store. They fit neatly in a trunk, service van, or shop cabinet, making them a practical choice for DIYers and pros alike.
• Pre-lift your vehicle for effortless jacking, not for direct crawling.
• 2.5" low lift height suit low-chassis vehicles and modified cars.
• 8° incline angle minimize the risk of undercarriage scraping.
• Supports up to 22,000 lbs/10 ton GVW per pair for heavier models.
• Reliable construction with heavy-duty PP composite body.
• Hollowed honeycomb structure promote structural strength.
• Non-slip, textured surface and wheel stop for secure tire placement.
• Efficient drainage with the open-bottom design.
• Stays stable on asphalt road, cement road, or indoor parking lot.
• Lightweight with integrated handle for quick transport and storage.
• Wide applicable scenarios for DIY repairs and professional shop use.
• Ideal for tasks like oil changes, car cleaning, or under-carriage repairs.
• Compact size fits neatly in trunks and cabinets.
• Use only on hard, level surfaces, not for dirt, grass, or inclined ground.

Weight & Dimensions:

• Product dimensions of each ramp: 27.5" x 8" x 3.2" (69.85 cm x 20.32 cm x 8.13 cm).
• Suitable tire width: max 8.6" (21.84 cm).
• Lift height: 2.5" (6.35 cm).
• Total net weight: 7 lbs (3.18 kg).
• Lightweight per pair: 6.9 lbs (3.1 kg).

Specifications:

• Color: Black
• Material: PP
• Max Load Capacity per Pair: 13,000 lbs
• Max Load Capacity per Ramp: 6,500 lbs
• GVW Capacity: 22,000 lbs
• Lift Angle: 8°
• Is Assembly Required: Yes
• Box QTY: 1 (May vary by batch)
• Note: Assembly is required.
• Note: Box quantity may vary by batch.

Package Includes:

• 2 x Car Service Ramps
• 1 x User Guide

Package Quantity: 1 (May vary by batch)

• Livraison standard gratuite.
• Expédié à la plupart des adresses canadiennes, à l'exception du Yukon, du NT et du NU.
• Heure limite : 10 h 00, heure normale de l'Est.
• Délai de traitement de la commande (avant l'expédition de votre commande) : 1 à 2 jours ouvrables (du lundi au Vendredi).
• Délai de livraison : 4 à 8 jours ouvrables - selon votre emplacement (du lundi au vendredi).
• Les délais de livraison sont des estimations et ne sont pas garantis.
• La plupart des articles sont expédiés depuis le Canada. Certains articles peuvent être expédiés depuis les États-Unis s'ils ne sont pas disponibles au Canada.
• Pour les commandes plus importantes, les articles peuvent arriver dans des boîtes séparées et peuvent ne pas faire partie du même envoi ; les délais de livraison peuvent varier.

Voir Expédition pour plus d'informations

• Les produits peuvent être retournés dans un délai de trente (30) jours à compter de la date de livraison.
• Les frais de retour sont gratuits si le produit est défectueux ou endommagé.
• Pour toutes autres raisons, le client sera tenu de payer les frais d'expédition.

Veuillez consulter la politique de retour et de remboursement pour plus d'informations.